Horner APG QX351 OCS HEQX351C103 - Manual (Page 85)

MAN0892-03-EN CH. 13
February 25, 2010 Page 85 of 109 #1039
13.5 Configuration
An overview of configuration:
1.) Start the configuration by selecting the Controller | I/O Configure menu item.
2.) If the QX351 is connected to the PC press the Auto Config System button to automatically
detect the Base model, I/O and any communication options.
3.) If the QX is not connected press the Config button to the right side top end of the screen. This
allows the base CPU to be selected.
4.) Select QX351 from the type drop down box.
5.) Once the QX351 CPU is selected, press OK to exit the dialog and configure the I/O.
6.) Once done configuring the I/O, OK out of configuration dialogs.