Triton BathyPro - Manual (Page 99)

Implementing Your Test Approach
After you have acquired the data over your Patch Test area, you are ready to use
the BathyPro Patch Test tool. The Patch Test program can be used to derive roll,
latency, pitch, and yaw offsets that can be applied during data acquisition and
processing.
BathyPro Patch Test
You perform the patch test on each of four parameters: Roll, Latency, Pitch,
Yaw. The test should be conducted in that order, one parameter at a time.
To do a Patch Test in BathyPro
1. In BathyPro’s main window right-click on the folder icon (Figure 54), and
select Add XTF files (MultiBeam data)….
2. Browse to the folder containing the Patch Test data, select all the files to
be analyzed, and click Open.
Figure 54. BathyPro project files expanded in working window
June 2004 BathyPro User’s Manual 99