Triton BathyPro - Manual (Page 28)

When you click Set Processing Parameters, the system displays the
Bathymetry Correction Settings dialog box. Figure 7 shows an example of
this dialog box.
Figure 7. Bathymetry Correction Settings dialog box
In the Bathymetry Correction Settings dialog box:
• Suppress Beam using Beam Quality — All beams flagged as bad quality
by the sonar will be ignored by BathyPro. In addition, you can choose to
ignore (suppress) beams flagged as POOR Quality, LOW Quality, or BAD
Quality by putting a check mark in the boxes next to these parameters. (If
you leave a box unchecked, you are choosing not to suppress these
marginal quality beams, so they will be included with your BathyPro
processed data.)
• Suppress Beam using Angle from vertical — Put a check mark next to
this parameter if you want to specify which beams, based on their angles
June 2004 BathyPro User’s Manual
28