Triton BathyPro - Manual (Page 112)

To change geometry settings
1. Click Geometry Settings in the Geometry and Detection Settings dialog
box.
The system displays the Boat Geometric settings dialog box. Refer to
Figure 21 for the settings that control this aspect of the program.
2. Click OK to allow these changes to influence the hyperbola processing.
To change navigation settings
1. Click Navigation Settings in the Geometry and Detection Settings dialog
box.
The system displays the Navigation Processing Settings dialog box. Refer
to Figure 26 and to Table 2 for information relevant to this choice.
2. Click OK to allow these changes to influence the hyperbola processing.
June 2004 BathyPro User’s Manual 112