Boonton 4540 Peak Power Meter User Manual - Manual (Page 35)

Boonton 4540 Series RF Power Meter
Getting Started 3-7
Table 3-2 LCD Monitor Display Fields (continued)
Ref. No. Field Name Mode Description
5
Timebase All For pulse and modulated mode, indicates the
timebase per division selected for the waveform
display. In statistical mode this field is replaced with
a label indicating the half span dB level for the
horizontal axis.
6
Status message All Displays messages indicating the status of the
instrument. Messages may indicate the calibration
status of sensors, the connection status of sensors, or
other ongoing instrument operations.
7
Vertical Markers All There are two vertical markers that allow level
measurements at specific times relative to the trigger
event. .
8
Parameters All Displays a table of measurement status parameters or
any selected automatic measurement.
9
Time Base Limits All These fields show the timebase limits. In the Pulse
Mode the time is relative to the trigger event. In
statistical mode these fields are replaced by the
horizontal axis dB limits.