Boonton 4540 Peak Power Meter User Manual - Manual (Page 24)

Boonton 4540 Series RF Power Meter
General Information 1-10
Table 1-2 4540 Series Performance Specifications (continued)
(Specifications are subject to change without notice)
PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
Case Dimensions:
8.4W x 3.5H x 13.5D inches (21.3 x 8.9 x 34.3 cm), Half-rack width, 2U height
Weight:
7.7 lbs (3.5kg)
Power Requirements:
90 to 260 VAC, 47 to 63 Hz, 50W (70VA) maximum. Fuse 1.0A-T
Operating Temperature:
0 to 50 degrees C
Storage Temperature:
-40 to +75 degrees C
Ventilation:
Thermostatically controlled fan
Humidity:
95% maximum, non-condensing
Altitude:
Operation up to 15,000 feet
Shock:
Withstands ±5G, 11ms impulse in X, Y, and Z axes, as per EN 60068-2-27
Vibration:
Withstands 2G sine, 1.25G random, as per EN 60068-2-6 and EN 60068-2-64
OTHER CHARACTERISTICS
Display:
4.0‖ Diagonal TFT color LCD, 320 x 240 pixels, CCFL Backlight.
Keyboard:
27 Key conductive rubber
Main Computer:
32-bit Floating Point embedded processor
DSP:
32-bit Floating Point DSP
Battery:
One user-replaceable BR2325 Lithium coin cell (alkaline cells optional) for
maintaining non-volatile memory information. Typical life: 10 years (lithium)
Panel setup storage:
Can save and recall 25 complete ―user‖ setups.
REGULATORY CHARACTERISTICS
CE Mark:
Full compliance with the following European Union directives and standards:
Safety: Low Voltage Directive 2006/95/EC
EN 60950-1:2002
EMC: Electromagnetic Compatibility Directive 2004/108/EC
EN 61326:1997 + A1:1998 + A2:2001 + A3:2003
RoHS: RoHS Directive 2002/95/EC
Construction:
Manufactured to the intent of MIL-T28800E, Type III, Class 5, Style E