Boonton 4540 Peak Power Meter User Manual - Manual (Page 133)

Boonton 4540 Series RF Power Meter
Operation 4-85
4.5.55 Setup > User Presets Menu
Main Pg 2 > Setup > User Preset > Preset Name
Description: Opens the User Preset Popup Menu with a list of
User Names that can be associated with a user
defined preset. (User1 thru User25). The selected
name will appear in the menu box.
Menu Type: Action.
SCPI Command: None
Main Pg 2 > Setup > Preset > Preset Recall
Description: Recalls the User Preset selection named above and
loads its parameters into the instrument. If the preset
name above has not been previously loaded or is
erased, this menu box will be dimmed and disabled.
Menu Type: Action.
SCPI Command: None
Main Pg 2 > Setup > Preset > Current State Store
Description: Store the current instrument parameters in the
user location named above. (e.g. USER1). This
will over write existing data, if any.
Menu Type: Action.
SCPI Command: None
Main Pg 2 > Setup > Preset > Preset Delete
Description: Erase the data stored in the user location named
above. (e.g. USER1).
Menu Type: Action.
SCPI Command: None
Fig. 4-74 Setup User
Presets Menu