HP Onboard Administrator - Manual (Page 74)

First Time Setup Wizard 74
Field Possible value Description
Subnet Mask ###.###.###.### where ###
ranges from 0 to 255
Subnet mask for the Onboard Administrator
(required if static IP settings is selected)
Gateway ###.###.###.### where ###
ranges from 0 to 255 Gateway address for the Onboard
Administrator (required if static IP settings is
selected)
DNS Server 1 ###.###.###.### where ###
ranges from 0 to 255 The IP address for the primary DNS server
DNS Server 2 ###.###.###.### where ###
ranges from 0 to 255 The IP address for the secondary DNS server
First Time Setup Wizard IPv6 Network Settings Screen
IPv6 supports multiple addresses. You can use a DHCP service to assign IP settings to your Onboard
Administrators, enable SLAAC, and manually assign static IP settings. You can enable any combination of
the network settings. With IPv6, SLAAC, and DHCPv6 enabled, the Onboard Administrator can obtain IP
addresses from all the selected sources. It can have both automatically-assigned IP addresses and
user-specified static IP addresses. The IPv6 Settings screen gives you additional choices, some of which are
unique to IPv6.
First Time Setup Wizard Network IPv6 Settings
IPv6 supports multiple addresses. You can enable any combination of the network settings. With IPv6,
SLAAC and/or DHCPv6 enabled, the Onboard Administrator can obtain IP addresses from all the selected
sources. It can have both automatically assigned and user-specified static IP addresses. The Enable SLAAC
and Enable DHCPv6 settings take effect only if IPv6 is enabled.
• Enable IPv6—Enables IPv6 protocol for all Onboard Administrator, interconnect, and server iLO
modules in the enclosure.