HP Onboard Administrator - Manual (Page 299)

Using the command line interface 299
For security, the retrieved current configuration does not contain any user passwords. You can edit the script
manually to add the user passwords after the user name on the ADD USER lines. Also, the retrieved current
configuration does not contain any of the LCD settings (Lock Buttons, Enable PIN Protection, and PIN Code).
These settings cannot be added using the configuration script.
Clearing the VC mode removes all VC settings from the enclosure. Power off all VC-configured servers before
clearing the VC mode. If servers are not powered down, they might maintain the VC settings until they are
rebooted. You must clear the VC mode before changing to the FIPS mode OFF/ON/DEBUG.
To clear the VC Mode:
1. Click Clear VC Mode. A confirmation screen appears, stating All servers should be powered
off and not configured by Virtual Connect prior to clearing VC mode. Are you
sure that you wish to clear VC mode?
2. Click OK.