HP Onboard Administrator - Manual (Page 154)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 154
An existing VLAN name can be edited by navigating to the Defined VLANs tab. Select one VLAN, and then
click Edit. The Edit VLAN page appears with a field that enables you to edit the VLAN name. The VLAN name
is not a required field.
Existing VLANs can be removed from the Defined VLANs page by selecting VLANs and then clicking Delete.
Deleting a VLAN moves all of the members into the default VLAN. The default VLAN cannot be deleted.
NOTE: Accessing the Active OA through a link-local IPv6 address might not work on all client
system setups containing multiple network interfaces.
Configuring devices
After VLANs are defined under the Defined VLANs tab, devices can be assigned to use them. The Onboard
Administrator is assigned to a VLAN under the VLAN Settings tab. Device bays and Interconnect bays are
assigned under the Device Bays tab and the Interconnect Bays tab.
Device bays