Alertmail – HP Onboard Administrator User Manual
Page 101
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 101
Component Firmware
Column
Description
Bay
The device bay within the enclosure
Device Model
The model number of the device
Current Firmware
Version
The installed firmware version of the device
Available Firmware
Version
The latest version of firmware currently available for the device
The Enclosure Component Firmware tab also shows the firmware version of the location PIC (BladeSystem
Location Device), as provided by Location Discovery Services. For more information on using Location
Discovery Services, see "Rack Overview screen (on page
)."
AlertMail
AlertMail enables users to receive system events by e-mail instead of using SNMP traps. AlertMail is
completely independent from SNMP, and both can be enabled at the same time. AlertMail uses standard
SMTP commands to communicate with an SMTP-capable mail server. The “reply to” address for each e-mail
sent by AlertMail will be
select the Enable AlertMail check box.
To test the AlertMail function, ensure that the email address, alert sender domain, and SMTP server settings
are correct. Select Send Test AlertMail. To confirm the test completed successfully, verify the recipient email
account.