HP Onboard Administrator - Manual (Page 259)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 259
Power Supply Information
Selecting a specific power supply opens the Power Supply Information—Bay x page, where x is the bay of
the selected power supply. This screen provides status information on the selected power supply.
Status information
Row Description
Status
The overall status of the power supply. Possible values are Unknown, OK, Degraded,
and Critical Error.
Input Status The input status of the power supply. Possible values are Unknown, OK, Degraded,
and Critical Error.
Present Output The amount of power provided by the power supply in AC or DC mode. This value is
displayed in watts
Output Capacity The maximum amount of power that can be provided by the power supply in AC or DC
mode. This value is displayed in watts.
Model The power supply model name.
Serial Number The unique serial number of the power supply.
Part Number The part number to be used when ordering an additional or replacement power supply
of this type.
Spare Part Number The spare part number to be used when ordering an additional or replacement power
supply.
Diagnostic Information
Diagnostic information is gathered by polling a device microcontroller (resulting in a degraded status if a
failure has occurred) or is sent by the device microcontroller, without being polled to report a failure.
Row Description
Device Identification
Data The device identification data checked is information such as model name, part
number, serial number, and other information used to identify the device. This data is
also referred to as FRU data. A device identification data error appears if the data is
not present or not readable by the Onboard Administrator. Possible values are OK or
Error.
Device Location Incorrect power supply location. Possible values are OK or Incorrect location for proper
device cooling.
Device Operational Device has failed; status was not requested by the Onboard Administrator. Possible
values are OK and Error.
Device Degraded
Device has failed; status was requested by the Onboard Administrator. Possible values
are OK and Error.
Power Cord Input power status. Possible values are OK and Error.
Device Mismatch This field indicates different power supply models are installed in the same enclosure
and you need to install the same power supply models in each bay.
Service Action Recommended service action required to correct a power supply error.
Click Refresh to update the power supply information.