HP Onboard Administrator User Manual
Page 112
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 112
NOTE:
Changing network settings on the Onboard Administrator that you are signed in to will
disconnect you from that Onboard Administrator. After you apply settings, you must sign in to the
Onboard Administrator again.
Field
Possible value
Description
IPv6 Static Address
1
####:####:####:####:####:####:####:##
##/###, where #### ranges from 0 to FFFF and
the prefix /### ranges from 1 to 128.
1 ,2
Onboard Administrator external NIC
IPv6 address 1.
IPv6 Static Address
2
####:####:####:####:####:####:####:##
##/###, where #### ranges from 0 to FFFF and
the prefix /### ranges from 1 to 128.
1,2
Onboard Administrator external NIC
IPv6 address 2.
IPv6 Static Address
3
####:####:####:####:####:####:####:##
##/###, where #### ranges from 0 to FFFF and
the prefix /### ranges from 1 to 128.
1,2
Onboard Administrator external NIC
IPv6 address 3.
IPv6 DNS 1
####:####:####:####:####:####:####:##
##/###, where #### ranges from 0 to FFFF and
the prefix /### ranges from 1 to 128. The prefix
is optional.
1
The IPv6 address for the first Static IPv6
DNS server.
IPv6 DNS 2
####:####:####:####:####:####:####:##
##/###, where #### ranges from 0 to FFFF and
the prefix /### ranges from 1 to 128. The prefix
is optional.
1
The IPv6 address for the second Static
IPv6 DNS server.
Static Default
Gateway
####:####:####:####:####:####:####:##
## where #### ranges from 0 to FFFF. A
compressed version of the same IPv6 address is
also supported. Do not specify a prefix. The
gateway is assumed reachable from within the
network.
1
The static IPv6 address for the IPv6
default gateway to be used by the
Onboard Administrator. This setting is
required in an IPv6 network
environment configured to be fully
static.
The Onboard Administrator can accept
IPv6 gateway configuration directly via
this setting and, if configured, via
Router Advertisements from IPv6 routers
on the management network. If Router
Advertisements provide IPv6 gateway
configuration, their gateway
configuration overrides the static IPv6
gateway setting. The IPv6 gateway
currently in use by the Onboard
Administrator is displayed in the
Current Default Gateway field on the
Active Onboard Administrator TCP/IP
Settings ("
Administrator TCP/IP Settings screen
) screen and the Standby
Onboard Administrator TCP/IP Settings
screen.