HP Onboard Administrator User Manual
Page 102
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 102
NOTE:
The Alert Sender Domain might not be needed. This field depends on the mail server
setup.
Field
Possible value
Description
E-Mail address
A valid email address for the administrator
or other designated individual receiving the
alert mail
SMTP Server
•
IPv4 address—###.###.###.###
where ### ranges from 0 to 255
•
IPv6
address—####:####:####:####:##
##:####:####:#### where ####
ranges from 0 to FFFF. A compressed
version of the same IPv6 address is also
supported.
•
DNS name—1 to 64 characters
including all alphanumeric characters
and the dash (-)
An IPv4 address, IPv6 address, or the DNS
name for the SMTP server
Alert Sender Name A character string including all
alphanumeric characters, the dash (-), the
underscore (_), and space. The field is
optional with a limit of 40 characters.
Onboard Administrator name
Alert Sender
Domain
A character string including all
alphanumeric characters, the dash (-), and
the period (.)
The domain in which the Onboard
Administrator resides. Mutually exclusive
with Sender Email.
Alert Sender E-mail
Sender's valid email address for the
administrator or other designated individual
receiving the alert mail.
1.
Select the Enable AlertMail checkbox to enable the AlertMail feature.
2.
Enter values for the e-mail address, alert sender domain, and SMTP server.
3.
Click Apply to save settings.
AlertMail, if enabled, sends alerts by e-mail for the following events:
o
Enclosure status change
o
Enclosure information change
o
Fan status change
o
Fan inserted
o
Fan removed
o
Power supply status
o
Power supply inserted
o
Power supply removed
o
Power supply overload
o
Blade inserted
o
Blade removed
o
Blade status
o
Blade thermal condition