Device failure errors – HP Onboard Administrator User Manual
Page 48
HP BladeSystem Insight Display 48
o
Remove the server blade to correct the mezzanine card installation (the Insight Display will indicate
the correct bay). For information on installing the mezzanine card, see the server-specific user guide
on the Documentation CD.
Device failure errors
Device failure errors occur when a component has failed. Device failure errors can occur on all components,
including:
•
Server blades
•
Storage blades
•
Power supplies
•
Interconnect modules
•
Onboard Administrator modules
•
Fans
•
AC power inputs
To correct a device failure error:
1.
Use the arrow buttons to navigate to Fix This, and press OK.
2.
Review and complete the corrective action suggested by the Insight Display. In most cases, you must
remove the failed component to clear the error.
3.
Replace the failed component with a spare, if applicable.
NOTE:
If the device failure error is an AC power input failure error, you must have the failed AC
input repaired to clear the error.