HP Onboard Administrator - Manual (Page 100)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 100
This includes information gathered by Location Discovery Services. For more information on using Location
Discovery Services, see "Rack Overview screen (on page 88 )."
Changing settings
Enclosure settings can be changed from this screen. To save the settings after making changes, click Apply.
Field Possible value Description
Enclosure Name 1 to 32 characters including all
alphanumeric characters, the
dash (-), and the underscore (_)
The name of the selected enclosure
Rack Name 1 to 32 characters including all
alphanumeric characters, the
dash (-), and the underscore (_)
The name of the rack in which the enclosure is
installed
Asset Tag 0 to 32 characters including all
alphanumeric characters, the
dash (-), and the underscore (_)
The asset tag is used for inventory control.
The default asset tag is blank
Enclosure Link Connections
This section provides a graphical view of the Enclosure Link Connections, located on the rear of the
enclosure, and detailed information on each enclosure link port.
To view a script containing a list of the current inventory of the enclosure, click SHOW ALL.
Virtual Buttons
To change the state of the enclosure UID light, which is located next to the enclosure link and Onboard
Administrator/iLO connections, click Toggle On/Off.