Using online help, Changing enclosure and device configurations, Recovering the administrator password – HP Onboard Administrator User Manual
Page 19
Introduction 19
Using online help
To access online help, click the blue box with the white question mark or Help located on the top right of the
screen under the header bar. Online help displays information related to the section of Onboard
Administrator in which you are navigating.
Changing enclosure and device configurations
After you have completed the First Time Setup Wizard, you can return to the Onboard Administrator GUI to
make configuration changes at any time. For information that will help you make changes to enclosure and
device configuration, user setup, and LDAP server settings and LDAP groups, see "Configuring the HP
BladeSystem c7000 enclosure and enclosure devices (on page
)."
For information about enclosure power settings, see "Enclosure Power Management (on page
)."
Recovering the administrator password
If the Administrator password has been lost, you can reset the administrator password to the factory default
that shipped on the tag with the Onboard Administrator module. The Onboard Administrator resets a lost
password to Lost Password/Flash Disaster Recovery (LP/FDR) mode. To reset the administrator password to
the factory default:
1.
Connect a computer to the serial port of the Active Onboard Administrator using a null-modem cable.
2.
With a null-modem cable (9600 N, 8, 1, VT100) locally connect to the Onboard Administrator.
3.
Open a suitable terminal window utility (Windows or Linux), and connect to the Active Onboard
Administrator.
4.
Press and hold in the Onboard Administrator reset button for 5 seconds.
5.
To boot the system into Lost Password modem Press L. The password appears as the system reboots.