HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 74)

Virtual Connect users and roles 74
Column Description
further verify that the correct certificate is being used.
Version Version of the certificate
Valid From The date and time when this certificate became valid
Valid To
The date and time when this certificate becomes invalid
Delete Click X in the line of the certificate to delete.
RADIUS Settings (RADIUS Server) screen
This screen enables domain administrators to configure a RADIUS server to authenticate users accessing the
CLI or GUI based on user name and password and to provide role-based authorization. Users and client
system access must be configured on the RADIUS server side prior to enabling this feature in VCM.
Configuration changes made on this screen do not update the RADIUS server.
Users with domain user role permissions can test a RADIUS configuration before applying it. For more
information, see "Test RADIUS authentication (on page 76 )."
The following table describes the fields within the RADIUS Settings (RADIUS Server) screen. Clicking another
link in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.
Field Description
Enable RADIUS
Authentication
Select to enable RADIUS authentication.
Server Address The IPv4 or IPv6 address, or the DNS host name of the RADIUS server used for
authentication
Server SSL Port The server UDP port number. Valid values include a valid port number between 1
and 65535. The default port is 1812.
Server Timeout The time in seconds that VCM should wait before timing out the request. If the
primary server times out and a secondary server is configured, VCM attempts the
request on the secondary server. If the secondary server times out, the request
fails. The valid range of values is from 1 to 600 seconds. The default timeout is 10
seconds.