HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 42)

Virtual Connect domains 42
vcDomainStackingLinkRedundancyStatusChange
The stacking link connection redundancy status has changed. The vcDomainStackingLinkRedundant OID
contained within this trap indicates whether all VC-Enet modules will remain connected to each other with the
loss of a link.
vcTestTrap
The VC domain test trap is received when the administrator sends a test trap via the VC GUI or CLI. The test
trap is sent to all configured trap destinations.
SNMP Configuration (VC-Enet)
By enabling SNMP for VC-Enet modules, network management systems can monitor VC-Enet modules in the
domain for events that might require corrective actions, such as warnings and errors. You must have network
or domain user permissions to administer SNMP Enet settings.
The HP ProLiant Gen8 Troubleshooting Guide, Volume II: Error Messages provides a list of error messages
and information to assist with interpreting and resolving error messages on ProLiant servers and server
blades. To view the guide, select a language:
• English ( http://www.hp.com/support/ProLiant_EMG_v1_en )
• French ( http://www.hp.com/support/ProLiant_EMG_v1_fr )
• Spanish ( http://www.hp.com/support/ProLiant_EMG_v1_sp )
• German ( http://www.hp.com/support/ProLiant_EMG_v1_gr )
• Japanese ( http://www.hp.com/support/ProLiant_EMG_v1_jp )
• Simplified Chinese ( http://www.hp.com/support/ProLiant_EMG_v1_sc )
The VC-Enet SNMP settings apply to all VC-Enet modules in the Virtual Connect domain.
The following table describes the fields within the SNMP Configuration screen.