HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 283)

Appendix B: Auto-deployment process 283
----
->show auto-deployment
====================================================================
Status Last TFTP TFTP Server TFTP File
Deployment Mode
====================================================================
Configuring -- -- AUTO 192.168.1.102 myconfig.script
Domain
--------------------------------------------------------------------
->show auto-deployment
====================================================================
Status Last TFTP TFTP Server TFTP File
Deployment Mode
====================================================================
Completed 2012-07-26 AUTO 192.168.1.102 myconfig.script
16:04:44.928
--------------------------------------------------------------------
Viewing deployment information, status, and logs
When the show auto-deployment command is entered on the command line, the current
auto-deployment settings and status are displayed. Six different properties are displayed to the user.
->show auto-deployment
====================================================================
Status Last TFTP TFTP Server TFTP File
Deployment Mode
====================================================================
Completed 2012-07-26 AUTO 192.168.1.102 myconfig.script
16:04:44.928
--------------------------------------------------------------------
These properties are described in more detail in the following table.
Property Description
Status
Indicates the status of the deployment operation. Several values exist for this property
throughout the deployment process. When the deployment operation is completed, it
indicates the last status of the deployment operation; status indicates "Completed" if the
deployment was successful, or indicates an error status if the deployment was not
successful. For possible status values for this property, see "The deployment status (on
page 284 )".
Last Deployment This property represents the date and time the last deployment was completed. If the
last deployment was not successful, the value represents the date and time the
deployment operation terminated on error. If a deployment has not been attempted,
this property is blank.
TFTP Mode The TFTP Mode indicates whether the TFTP server settings used for deployment are
discovered from the DHCP configuration, or whether they are manually specified by
the user. The possible values for this property are "AUTO" and "MANUAL". The
default value is "AUTO".