Module status definitions and causes – HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem User Manual
Page 269
Maintenance and troubleshooting 269
VC displays cause and root cause information for domain status alerts. To view detailed information about
a device, click that device name in the list.
Module status definitions and causes
INCOMPATIBLE—Module is incompatible with the module in the horizontally adjacent bay.
UNKNOWN—Status is unknown.
The following table lists module status definitions and possible causes.
Status
Possible cause
Suggested action
UNKNOWN
The module is not supported with this
version of VC:
•
HP 4Gb VC-FC Module not supported
in VC 4.10 and higher
•
HP 1/10 Gb not supported in VC
3.70 and higher
•
HP 1/10 GB-F not supported in VC
3.70 and higher
Replace with a supported module.
INCOMPATIBLE
The module is incompatible with the
module in the horizontally adjacent bay.
Be sure you have a valid configuration. See the
HP Virtual Connect for c-Class BladeSystem
Setup and Installation Guide on the Installing
tab of the HP BladeSystem Technical Resources
website