HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 225)

Virtual Connect modules 225
Task Action
Refresh data in the chart Click Refresh at the button of the chart. The Refresh option will be disabled
according to the sampling rate. It becomes enabled after the time frame
established by the sampling rate has elapsed.
Zoom selected chart range To draw a zoom area, click on the chart and drag the mouse until all the data
points of interest are highlighted. A new chart is generated focusing on the
points selected after releasing the mouse button.
Zoom reset
Click Reset at the bottom of the chart. The original chart appears.
View sample time stamp The sample time stamp is located in the title bar of the chart.
Collapse or expand the chart
settings panel Click the Collapse/Expand arrow in the bar dividing the chart settings and the
chart.
Enclosure Information screen
The following table describes the rows within the Enclosure Information screen.
Row Description
Part Number The part number to be used when ordering an additional enclosure of this type
Product Name
The common descriptive name of the enclosure
OA IPv4 Address IPv4 IP address for the OA
OA IPv6 Address IPv6 IP address for the OA
Serial Number The unique serial number of the enclosure
Asset Tag If configured, the asset tag of the enclosure, used for inventory control
Manufacturer Name of the enclosure manufacturer
Spare Part Number The part number to be used when ordering a replacement enclosure
Rack Name Name of the enclosure rack (assigned through the Onboard Administrator)
Time Zone The time zone assigned to the enclosure
Blade Bays Number of device bays in the enclosure
Interconnected Trays Number of interconnect trays in the enclosure