HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 238)

Virtual Connect modules 238
DCBX Information* Description
Overall Status The overall status of DCBX protocol exchange with peer entity. The status
value “Ok” indicates that no error is detected in DCBX operation; for
example, the protocol exchange is successfully completed, or the port is
not enabled for DCBX. The status value “Failed” indicates an error in one
of the DCBX feature information exchanges. The specific reason for the
error appears in the individual feature state field below the pending
status.
Pending Status Indicates the status of applying local DCBX configuration changes. The
value “False” indicates that there is no pending DCBX exchange. The
value “True” indicates that the DCBX exchange is not completed.
AP State
The status of Application Protocol feature exchange
PFC State The status of Priority Flow Control feature exchange
PG State The status of Priority Group feature exchange
*This information is only available for physical uplink and downlink ports. It is not available for Flex-10 subports.
Port Statistic Description
reset_time* The date and time that the port was last reset. This is reported as the
number of seconds since January 1, 1970.
IfInOctets* The total number of octets received on the interface, including framing
characters
IfInUcastPkts* The number of subnetwork-unicast packets delivered to a higher-layer
protocol
IfInNUcastPkts* The number of non-unicast (subnetwork-broadcast or
subnetwork-multicast) packets delivered to a higher-layer protocol
IfInDiscards The number of inbound packets that were chosen to be discarded, even
though no errors had been detected, to prevent their being delivered to a
higher-layer protocol. One possible reason for discarding such a packet is
to free up buffer space.
IfInErrors
The number of inbound packets that contained errors preventing them
from being deliverable to a higher-layer protocol
IfInUnknownProtos The number of packets received via the interface that were discarded
because of an unknown or unsupported protocol
IfOutOctets* The total number of octets transmitted out of the interface, including
framing characters
IfOutUcastPkts* The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that were
discarded or not sent
IfOutNUcastPkts* The total number of packets that higher-level protocols requested be
transmitted to a non-unicast (subnetwork-broadcast or
subnetwork-multicast) address, including those that were discarded or not
sent
IfOutDiscards The number of outbound packets that were chosen to be discarded, even
though no errors had been detected, to prevent their being transmitted.
One possible reason for discarding such a packet is to free up buffer
space.
IfOutErrors The number of outbound packets that could not be transmitted because of
errors
IfOutQLen The length of the output packet queue (in packets)