Enclosures view screen – HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem User Manual
Page 62
HP BladeSystem c-Class enclosures 62
have network and storage access. Both the Primary and Standby modules in the base enclosure must be
recovered to regain management access to the VC domain.
For more information, see the HP Virtual Connect for c-Class BladeSystem Setup and Installation Guide on the
Installing tab of the HP BladeSystem Technical Resources website
Enclosures View screen
This graphical representation consists of an enclosure front view and rear view. To display a window with
information about a particular device, mouse over that device in this graphical view.
The Enclosures view provides status on each device in the enclosure. Select an individual device for more
information on that device. The Enclosures view also shows which bays the primary and backup modules are
installed in.
To display the Enclosures View screen, click Hardware Overview in the left navigation tree.