HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 197)

Virtual Connect server profiles 197
Server Profiles screen
This screen lists all server profiles that have been defined within the domain, including assigned and
unassigned profiles. From this screen, you can see the assigned device bays, NIC MAC addresses, FC HBA
WWNs, network connections, and Fibre Channel Fabric and Boot Parameters for all server profiles, as well
as generate a printable report of this information. Users with network role permissions can create a new
profile based on an existing profile or edit inline many attributes of the server profiles.
The following table describes the columns and fields within the Server Profiles screen.
Column Description
Status Status of each server profile
Profile Name Name of each server profile
Power Power status of the server in Server location
UID Icon indicates if the server UID is on or off
Server bay assignment The location of the device bay to which the server profile is assigned
MAC If the domain is set to show factory default MAC addresses, HW-DEFINED
appears. If the profile is using VC-defined MAC addresses, VC-DEFINED
appears. If the profile is using hardware MAC addresses,
FACTORY-DEFAULT appears.
WWN
If the domain is set to show factory default WWNs, HW-DEFINED appears.
If the profile is using VC-defined WWNs, VC-DEFINED appears. If the
profile is using hardware WWNs, FACTORY-DEFAULT appears.
Network Access Group The name of the network access group associated with the profile
Action Perform edit, delete, and copy operations
The following table describes the available actions within the Server Profiles screen.