HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 46)

Virtual Connect domains 46
The VC-FC SNMP settings apply to all VC-FC modules in the VC domain.
The following table describes the fields within the SNMP Configuration screen.
Field name Description
Enable SNMP Select to enable SNMP.
Enable SMI-S Select to enable SMI-S.
System Contact Specify a contact name for this system when SNMP is enabled. The maximum
length is 20 characters.
Read Community Controls SNMP read access when SNMP is enabled. The default value is "public".
The read community string must always be set when SNMP is enabled. The
maximum length is 24 characters.
SNMP Access Table of networks that are allowed SNMP access
IP Address IPv4 or IPv6 address for the allowed network
Network Mask Bits Network mask bits for the allowed network
Type Type of network
Action Perform add and delete actions
SNMP Trap Destinations SNMP trap destination table
Destination User-designated name for the trap destination. The Destination name must be
unique.
IP Address IPv4 or IPv6 address for the trap destination. DNS name is not supported.
Community String The Community String acts like a password for a given trap destination. The
trap-receiving application can use the community string to filter the incoming traps.
Default: public
Format Format of the new trap (SNMPv1)
Action Perform edit and delete operations
The following table describes the available actions in the SNMP Configuration screen. Clicking another link
in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.