HP Photosmart C6340 All-in-One Printer - Manual (Page 39)

3. Install the software for a network connection, choose Add a product, and then
choose Through the network.
4. When the installation is complete, open Printers and Faxes (or Printers) in the
Control Panel and delete the printers from the previous USB installation.
To change a USB connection to an integrated wireless WLAN 802.11 connection
1. Unplug the USB connection from the back of the product.
2. Press Setup.
3. Press the down arrow button until Network is highlighted, and then press OK.
4. Press the down arrow button to highlight Wireless Setup Wizard, and then press
OK.
This runs the Wireless Setup Wizard.
5. Install the software for a network connection, choose Add a Device, and then choose
Through the network.
6. When the installation is complete, open Printers and Faxes (or Printers) in the
Control Panel and delete the printers for the USB installation.
For more detailed instructions on connecting the HP All-in-One to a network, see:
• “Set up the HP All-in-One on a wired (Ethernet) network” on page 25
• “Set up the HP All-in-One on an integrated wireless (WLAN 802.11) network”
on page 27
• “Set up the HP All-in-One using an ad hoc wireless connection” on page 30
Manage your network settings
You can manage network settings for the HP All-in-One through the HP All-in-One control
panel. Additional advanced settings are available in the Embedded Web Server, a
configuration and status tool you access from your Web browser using an existing
network connection to the HP All-in-One.
This section contains the following topics:
• Change basic network settings from the control panel
• Change advanced network settings from the control panel settings
• Use the Embedded Web Server
• Network configuration page definitions
Change basic network settings from the control panel
The HP All-in-One control panel enables you to set up and manage a wireless connection
and to perform a variety of network management tasks. This includes viewing the network
settings, restoring the network defaults, turning the wireless radio on and off, and
changing the network settings.
Chapter 4
36 Finish setting up the HP All-in-One
Finish set
up