HP Photosmart C6340 All-in-One Printer User Manual

Page 35

Select the Use Windows to configure my wireless network settings check box.

Click Add, and then do the following:
a. In Network name (SSID) box, type in a unique network name of your choice.

NOTE:

The network name is case sensitive, so it is important to remember

any uppercase (capital) and lowercase (small) letters.

b. If there is a Network Authentication list, select Open. Otherwise, go to the next

step.

c. In the Data encryption list, select WEP.

NOTE:

It is possible to create a network that does not use a WEP key.

However, HP recommends using a WEP key in order to secure your network.

d. Make sure that the check box is not selected next to The key is provided for me

automatically. If it is selected, click the check box to clear it.

e. In the Network key box, type a WEP key that has exactly 5 or exactly 13

alphanumeric (ASCII) characters. For example, if you enter 5 characters, you
might enter ABCDE or 12345. Or, if you enter 13 characters, you might enter
ABCDEF1234567. (12345 and ABCDE are examples only. Select a combination
of your choosing.)
Alternatively, you can use HEX (hexadecimal) characters for the WEP key. A HEX
WEP key must be 10 characters for 40 bit encryption, or 26 characters for 128 bit
encryption.

f. In the Confirm network key box, type the same WEP key you typed in the

previous step.

NOTE:

You must remember the exact uppercase (capital) and lowercase

(small) letters. If you enter your WEP key incorrectly on the product, the
wireless connection will fail.

g. Write down the WEP key exactly as you typed it, including uppercase and

lowercase letters.

h. Select the check box for This is a computer-to-computer (ad hoc) network;

wireless access points are not used.

Click OK to close the Wireless network properties window, and then click OK
again.

Click OK again to close the Wireless Network Properties Connection window.

Related topics

•

“Network glossary” on page 48

•

“Connect to a wireless ad hoc network” on page 33

Create a network profile for other operating systems
If you have an operating system other than Windows Vista or Windows XP, HP
recommends that you use the configuration program that came with your wireless LAN
card. To find the configuration program for your wireless LAN card, access your
computer's list of programs.
Using the LAN card configuration program, create a network profile that has the following
values:

Chapter 4

Finish setting up the HP All-in-One

Finish set