HP Photosmart C6340 All-in-One Printer User Manual
Page 296
Go to
.
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Cause: The sensor was defective.
Ink cartridge is missing, incorrectly installed, or not intended for your product
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
•
Solution 1: Insert all ink cartridges
•
Solution 2: Check if all ink cartridges are properly installed
•
Solution 3: Clean the ink cartridge contacts
•
Solution 4: Contact HP support
Solution 1: Insert all ink cartridges
Solution: Make sure all of the ink cartridges are inserted.
For more information, see:
“Replace the ink cartridges” on page 123
Cause: One or more ink cartridges were missing.
If this did not solve the issue, try the next solution.
Solution 2: Check if all ink cartridges are properly installed
Solution: Make sure all of the ink cartridges are properly installed. Refer to the
following steps to resolve this error.
To make sure the ink cartridges are properly installed
1.
Make sure the product is turned on.
2.
Open the ink cartridge access door by lifting from the front right of the product,
until the door locks into place.
Errors
293
Trou
bles
ho
ot
ing