HP Insight Cluster Management Utility - Manual (Page 45)

Figure 18 New autoinstall logical group
After the autoinstall logical group is created, the HP Insight CMU image directory contains a new
directory with the name of the logical group. This directory contains:
•
autoinst.tmpl.orig —An exact copy of the autoinstall file.
•
repository —A logical link to the autoinstall repository.
For example:
# ls -l /opt/cmu/image/rh5u5_autoinstall/
total 4
-rw-r--r-- 1 root root 1313 Oct 11 13:48 autoinst.tmpl-orig
lrwxrwxrwx 1 root root 31 Oct 11 13:48 repository ->
/data/repositories/rh5u5_x86_64
4.2.4.3 Registering compute nodes
To enable autoinstall, a compute node must be registered in the autoinstall logical group. Registration
is the same as registering a normal HP Insight CMU logical group.
4.2.4.4 Autoinstall compute nodes
When you start autoinstall on a compute node, the following files are created:
•
autoinst.tmpl-cmu —A copy of your autoinstall file with additional directives required by
HP Insight CMU.
•
autoinst-[compute_node_hostname] —The autoinstall template with hard-coded
node-specific information.
•
pxelinux_template —The pxelinux boot parameter file template for this logical group.
•
pxelinux-[ compute_node_hostname] —The pxelinux boot parameter file for a specific
node.
For example:
# ls -l /opt/cmu/image/rh5u5_autoinstall/
total 24
-rw-r--r-- 1 root root 2881 Oct 11 15:38 autoinst-node1
-rw-r--r-- 1 root root 2861 Oct 11 15:38 autoinst.tmpl-cmu
-rw-r--r-- 1 root root 1313 Oct 11 15:35 autoinst.tmpl-orig
-rw-r--r-- 1 root root 13 Oct 11 15:38 node1.log
-rw-r--r-- 1 root root 832 Oct 11 15:38 pxelinux-node1
-rw-r--r-- 1 root root 830 Oct 11 15:38 pxelinux_template
lrwxrwxrwx 1 root root 31 Oct 11 15:35 repository -> /data/repositories/rh5u5_x86_64
4.2 Autoinstall 45