Additional information, 1 electronic data sheet (eds file), 2 further documents – NORD Drivesystems BU0060 User Manual
Page 99: 3 repair information, 1 repairs, Electronic data sheet (eds file), Further documents, Repair information, Repairs, 8 additional information
8 Additional information
BU 0060 GB-4112
99
8. Additional information
Pos : 183 /Anleit ungen/El ektr oni k/Buss yst eme/ 8. Zusatzinfor mationen/El ectr onic D at a Sheet ( eds – D at ei) [CAN open] @ 1\ mod_1343038497213_388. doc x @ 35941 @ 2 @ 1
8.1 Electronic data sheet (eds file)
All available objects are contained in the (SK***E.eds) “Electronic data sheet” (eds file). This can be
downloaded free of charge from
The selection of the correct file is made according to the name of the relevant bus module (e.g.
SK TU3-CAO). The correct assignment can be found in the attached readme.txt file. If necessary,
various versions of the eds file are available for selection. In this case, the correct version must be
selected according to the firmware version of the frequency inverter (P707).
Pos : 184 /Anleit ungen/El ektr oni k/Buss yst eme/ 8. Zusatzinfor mationen/Weit erf ühr ende D okumente [C ANopen] @ 1\ mod_1343040138440_388.doc x @ 35965 @ 2 @ 1
8.2 Further documents
Internet
Literature
CIA draft Standard 301
CIA draft Standard 402
Pos : 185 /Anleit ungen/El ektr oni k/FU und St art er/9. Wartungs- und Ser vic ehi nweise/9. 2 R epar at urhi nweis e @ 0\ mod_1328189697671_388. doc x @ 14558 @ 233 @ 1
8.3 Repair information
If you contact our technical support, please have the precise device type (rating plate/display),
accessories and/or options, the software version used (P707) and the series number (name plate) at
hand.
8.3.1 Repairs
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstraße 37
26605 Aurich, Germany
For queries about repairs, please contact:
Getriebebau NORD GmbH & Co. KG
Tel.: 04532 / 289-2515
Fax: 04532 / 289-2555
If a frequency inverter is sent in for repair, no liability can be accepted for any added components, e.g.
such as mains cables, potentiometer, external displays, etc.!
Please remove all non-original parts from the frequency inverter.