NORD Drivesystems BU0060 - Manual (Page 13)

1 Introduction
BU 0060 GB-4112 13
1.5 Scope of delivery
Technology unit SK TU1-CAN for SK 700E IP20 or
SK TU1-CAO for SK 700E IP20 or
SK TU2-CAO for SK 300E / SK 750E IP55 or
SK TU2-CAO-C for SK 300E / SK 750E IP66 or
SK TU3-CAO for SK 5xxE IP20 or
Customer interface SK CU1-CAN for SK 700E / SK 750E IP00 or
SK CU1-CAN-RJ for SK 700E / SK 750E IP00
The operating instructions for the above bus modules or the relevant frequency inverters as well as
the NORDCON parameterisation software are available for download free of charge under
www.nord.com . In addition, a documentation CD is provided with every frequency inverter
(designation: EPD), on which the above data is also provided.
Information Flat connecting sleeve for PE connection
The technology units SK TU1 and SK TU3 are also supplied with a flat connecting sleeve. This sleeve must be
used to produce a correct PE connection of the technology unit via an appropriate cable (cross-section 1.5mm²).
Pos : 26 /Anl eitungen/ Elektroni k/FU und Start er/ 1. Allgemei nes/ 1. 5 Z ulas sungen @ 0\ mod_1326111302308_388.doc x @ 6223 @ 2 @ 1
1.6 Certifications
Pos : 27 /Anl eitungen/ Elektroni k/FU und Start er/ 1. Allgemei nes/ 1. 5. 1 Eur opäisc he EM V-Richtli nie @ 0\ mod_1325780630565_388. doc x @ 5431 @ 3 @ 1
1.6.1 European EMC Directive
If the frequency inverter is installed according to the recommendations in this manual, it meets all
EMC directive requirements, as per the EMC product standard for motor-operated systems EN
61800-3.
Pos : 28 /Anl eitungen/ Elektroni k/FU und Start er/ 1. Allgemei nes/ 1. 5. 4 R oHS- konfor m @ 0\ mod_1325836122418_388. doc x @ 5503 @ 3 @ 1
1.6.2 RoHS compliant
The frequency inverters and optional modules are designed to be RoHS
compliant according to Directive 2002/95/EU.
Pos : 29 /Anl eitungen/ Elektroni k/ Bus s yst eme/1. Einf ührung/T ypensc hlüssel [SK TU 1-3, CU 1] @ 1\ mod_1336641489466_388. doc x @ 26262 @ 2 @ 1