NORD Drivesystems BU0060 - Manual (Page 29)

2 Modules
BU 0060 GB-4112 29
Removing the customer unit
1. Switch off the mains voltage, observe
the waiting period.
2. Remove the cover grille from the
connection area by loosening the 2
screws and levering out the device
cover (slot) or simply pull it out.
3. Locking lever in the "„open“ position.
4. Using a screwdriver (as shown), lever
the customer unit out of its engaged
position and then remove it by hand.
5. Locking lever in the „closed“ position.
6. Replace all covers.