KROHNE OPTIMASS with MFC 05x EN - Manual (Page 67)

Installation and Operating Instructions OPTIMASS 66
Fct.
No Text Description and settings
5 FACTORY.SET Main menu 5 Factory settings
5.1 CALIBRATED Submenu 5.1 Calibration values
5.1.1 CF1
5.1.2 CF2
5.1.3 CF3
5.1.4 CF4
5.1.5 CF5
5.1.6 CF6
5.1.7 CF7
5.1.8 CF8
5.1.9 CF9
5.1.10 CF10
5.1.11 CF11
5.1.12 CF12
5.1.13 CF13
5.1.14 CF14
5.1.15 CF15
5.1.16 CF16
5.1.17 CF17
5.1.18 CF18
5.1.19 CF19
5.1.20 CF20
Display of transducer calibration coefficients 5.1.11(Read only)
5.1.21 METER CORR. Input of a meter correction factor
5.2 METER Submenu 5.2 meter data
5.2.1 METER TYPE Display the meter type
5.2.2 METER SIZE Display the meter size
5.2.3 MATERIAL Display the measuring tube material
5.2.4 TUBE AMP Display of the tube amplitude in percent
5.3 TEMP.LIMITS Submenu 5.3 Temperature limits
5.3.1 MAX. TEMP. Display the maximum allowed temperature
5.3.2 MIN. TEMP. Display the minimum allowed temperature
5.4 TEMP. HIST. Submenu 5.4 Temperature history
5.4.1 MAX. TEMP. Display the maximum recorded temperature
5.4.2 MIN. TEMP. Display the minimum recorded temperature
5.5 SERIAL NO. Submenu 5.5 Serial numbers
5.5.1 BACKEND Display the Backend serial number
5.5.2 FRONTEND Display the Frontend serial number
5.5.3 METER Display the meter serial number
5.5.4 SYSTEM Display the system serial number