KROHNE OPTIMASS with MFC 05x EN - Manual (Page 106)

Installation and Operating Instructions OPTIMASS 105
8 Device Configuration sheet
The following pages can be photocopied for your use when required.
Serial No.
Tag No.
MENU 3 CONFIGURATION
3.1.1 L.F. CUTOFF 3.2.6 TEMPERATUR.
3.1.2 TIME CONST. 3.2.7 DENSITY
3.1.3 FLOW MODE 3.2.8 CONC. FLOW
3.1.4 FLOW DIR. 3.2.9 CONC. TOTAL
3.1.5 PIPE DIAM. 3.2.10 CONC.BY.MASS
3.1.6 ADD. TOTAL 3.2.11 CONC.BY.VOL.
3.1.7 ERROR MSG 3.2.12 VELOCITY
3.1.8 PRESS TIME 3.2.13 LANGUAGE
3.1.9 PRESS CUTOF 3.3 CONC. MEAS. See separate sheet in
Concentration Manual
3.2.1 CYCL. DISP. 3.4.1 DENS. MODE
3.2.2 MASS FLOW 3.4.2 FIXED
3.2.3 MASS TOTAL 3.4.2 REF TEMP
3.2.4 VOLUME.FLOW 3.4.3 SLOPE
3.2.5 VOL.TOTAL 3.6.1 TAG ID.
3.2.6 TEMPERATUR.
MENU 4 INPUT / OUTPUT CONFIGURATION
4.1 I.O. FITTED 4.6.1 FUNCTION
4.2.1 FUNCTION 4.6.2 LOW LIMIT or
4.2.2 RANGE I 4.6.3 HIGH LIMIT.
4.2.3 LOW LIMIT 4.6.4 ACTIVLEVEL
4.2.4 HIGH LIMIT 4.7.1 FUNCTION
4.3.1 FUNCTION 4.7.2 ACTIVLEVEL
4.3.2 RANGE I 4.8.1 FUNCTION
4.3.3 LOW LIMIT 4.8.2 CONDITION
4.3.4 HIGH LIMIT 4.8.3 LOW LIMIT
4.4.1 FUNCTION 4.8.4 HIGH LIMIT
4.4.2 RANGE I 4.9 COMM.MODULE
4.4.3 LOW LIMIT 4.9.1 PROTOCOL
4.4.4 HIGH LIMIT 4.9.2 ADDRESS
4.5.1 FUNCTION 4.9.3 BAUDRATE
4.5.2 LOW LIMIT or PULSE.WIDTH 4.9.4 SER.FORMAT
4.5.3 HIGH LIMIT or PULSE VAL.
4.5.4 MAX FREQ
MENU 5 FACTORY SETTINGS (Read only)
5.1.1 CF1 5.2 METER
5.1.2 CF2 5.2.1 METER TYPE
5.1.3 CF3 5.2.2 METER SIZE
5.1.4 CF4 5.2.3 MATERIAL
5.1.5 CF5 5.2.4 TUBE AMP
5.1.6 CF6 5.3 TEMP.LIMITS
5.1.7 CF7 5.3.1 MAX. TEMP.
5.1.8 CF8 5.3.2 MIN. TEMP.
5.1.9 CF9 5.4 TEMP. HIST.
5.1.10 CF10 5.4.1 MAX. TEMP.
5.1.11 CF11 5.4.2 MIN. TEMP.
5.1.12 CF12 5.5 SERIAL NO.
5.1.13 CF13 5.5.1 BACKEND
5.1.14 CF14 5.5.2 FRONTEND
5.1.15 CF15 5.5.3 METER
5.1.16 CF16 5.5.4 SYSTEM
5.1.17 CF17
5.1.18 CF18
5.1.19 CF19
5.1.20 CF20
5.1.21 METER CORR.