KROHNE OPTIMASS with MFC 05x EN - Manual (Page 108)

Installation and Operating Instructions OPTIMASS 107
9 Declaration of Cleanliness Certificate
Returning a device for testing or repair to KROHNE
This device has been carefully manufactured and tested. If installed and operated in accordance with
these operating instructions, it will rarely present any problems. Should you nevertheless need to return a
device for inspection or repair, please pay strict attention to the following points:
Due to statutory regulations on environmental protection and safeguarding the health and safety of our
personnel, KROHNE may only handle, test and repair returned devices that have been in contact with
products without risk to personnel and environment.
This means that KROHNE can only service this device if it is accompanied by the following certificate
confirming that the device is safe to handle.
If the device has been operated with toxic, caustic, flammable or water-endangering products, you are
kindly requested:
•
to check and ensure, if necessary by rinsing or neutralizing, that all cavities are free from such
dangerous substances,
• to enclose a certificate with the device confirming that is safe to handle and stating the product used.
We cannot service this device unless accompanied by such a certificate.
S P E C I M E N certificate
Company:
……………………………………………………
..
Address:
………………………………………………………….
Department:
…………………………………………………..
Name:
…………………………………………………………….
Tel. No.:
……………………………………………………
Fax No.:
…………………………………………………………..
The enclosed device
Type:
……………………………………………………………………………………………………………………………
KROHNE Order No. or Series No.:
………………………………………………………………………………………………….
has been operated with the following liquid:
………………………………………………………………………………………..
Because this liquid is 6 water-hazardous 6 toxic 6 caustic 6 flammable
we have 6 checked that all cavities in the instrument are free from such substances /
6 flushed out and neutralized all cavities in the device
We confirm that there is no risk to humans or environment through any residual liquid contained in this
device.
Date:
…………………………………
Signature:
………………………………………………………………………………
Company stamp: