KROHNE OPTISONIC 3400 EN - Manual (Page 99)

TECHNICAL DATA
8
99
OPTISONIC 3400
www.krohne.com 11/2013 - 4002037702 - HB OPTISONIC 3400 -en-R02
HART HART HART HART ®
Description HART ® protocol via active and passive current output
HART ® version: V7
Universal HART ® parameter: completely integrated
Load ≥ 250 Ω t HART ® test point:
Note maximum load for current output!
Multidrop Yes, current output = 4 mA
Multidrop addresses adjustable in operation menu 1...15
Device drivers DD for FC 375/475, AMS, PDM, DTM for FDT
Pulse or frequency output Pulse or frequency output Pulse or frequency output Pulse or frequency output
Output data Volume flow, mass flow
Function Adjustable as pulse of frequency output
Pulse rate/frequency 0.01...10000 pulses/s or Hz
Settings For Q = 100%: 0.01... 10000 pulses per second or pulses
per unit volume.
Pulse width: adjustable as automatic, symmetric or fixed
(0.05...2000 ms)
Operating data Basic I/Os Modular I/Os Ex i
Active - U
nom
= 24 VDC -
f
max
in operating
menu set to:
ffff
max max max max
≤ 100 Hz: 100 Hz: 100 Hz: 100 Hz:
I ≤ 20 mA
R
L, max
= 47 kΩ
open:
I ≤ 0.05 mA
closed:
U
0,nom
= 24 V at
I = 20 mA
F
max
in operating
menu set to:
100 Hz < f 100 Hz < f 100 Hz < f 100 Hz < f
max max max max
≤ 10 10 10 10
kHz: kHz: kHz: kHz:
I ≤ 20 mA
R
L
≤ 10 kΩ for f ≤
1 kHz
R
L
≤ 1 kΩ for f ≤
10 kHz
open:
I ≤ 0.05 mA
closed:
U
0,nom
= 22.5 V at
I = 1 mA
U
0,nom
= 21.5 V at
I = 10 mA
U
0,nom
= 19 V at
I = 20 mA