KROHNE OPTISONIC 3400 EN - Manual (Page 126)

9
DESCRIPTION OF HART INTERFACE
126
OPTISONIC 3400
www.krohne.com 11/2013 - 4002037702 - HB OPTISONIC 3400 -en-R02
9.10 Field Device Tool Device Type Manager (FDT DTM)
A Field Device Tool Container or Frame Application is basically a PC program used to configure
HART
® , PROFIBUS and Foundation Fieldbus devices. Device Type Managers (DTMs) are used to
integrate different devices into a FDT container.
9.10.1 Installation
If the Device Type Manager for the signal converter has not yet been installed on the FDT
Container, a setup is required which is available for download from the website or on CD-ROM.
See the supplied documentation for information on how to install and set up the DTM.
9.10.2 Operation
Operating the signal converter via DTM is very similar to manual device control using the
keyboard. See also the local device display and the handbook.
9.11 HART Menu Tree; UFC400
9.11.1 HART Menu Tree - Field Communicator HART Application
The Field Communicator supports the standard EDDL Root Menu.
In the signal converter HART DD it is implemented as a combination of other standard EDDL
menus:
• Process Variables Root Menu (details on page 130)
• Diagnostic Root Menu (details on page 133)
• Device Root Menu (details on page 135)
The menus are located in the Field Communicator user interface as follows:
Field Communicator HART Application
1 Offline
2 Online 1 Process Variables (Process Variables Root Menu)
2 Diag/Service (Diagnostic Root Menu)
3 Quick Setup (Device Root Menu)
4 Detailed Setup (Device Root Menu)
5 Service (Device Root Menu)
3 Utility
4 HART Diagnostics