Jenway 6715 User Manual

Page 64

Mode settings – method name, measurement mode, wavelength range, plot interval, method
security (if logged in)

Analysis Points – up to 30 wavelengths at which absorbance will be reported

Measurement display – auto scaling, axis setting, colour selection

Accessory options – varies with type of accessory module fitted

Allows selection of internal or external printer, graph details, batch ID and enables or disables
the Auto Log feature

Press to accept settings entered

Setting Method iD

To allocate a Method name select the

Method key and enter the preferred name using the

alphanumeric keypad. The

Clear key will clear all information entered from the screen. The Del key

allows individual letters or digits to be removed. The

Cancel key will return you to the previous menu

and the method name will remain as Default Method. The

Enter key accepts the new method ID and

returns you to the previous menu.

note: The new Method ID can only be used to identify the method on a printout to the internal or
external printer module. The generic user has no additional facility to store or recall results or methods.

Selecting Measurement Mode

The

Measurement Mode key toggles between Absorbance and Transmittance.

This manual is related to the following products:

6705 6700