Jenway 6715 User Manual
Page 134
116
Setting Wavelength
Select the
Wavelength key and enter the wavelength using the numeric keypad. The Clear key will
clear all information entered from the screen. The
Del key allows individual letters or digits to be
removed. The
Cancel key will return you to the previous menu and the wavelength will not alter. The
Enter key accepts the new wavelength and returns you to the previous menu. (At certain wavelengths
order selecting filters may be heard switching in or out).
Selecting resolution
This enables the resolution of the result to be set. Resolution can be set using the
Resolution key to
scroll through the available options.
Resolution options are: 1, 0.1, 0.01 and 0.001.
Selecting Units
Selection of units is made using the
Units key to scroll through the available measurement options.
The following units are available:- mEq/l, ppm, mg/l, g/l, %, µg/ml, mg/ml, g/dl, mg/dl, µg/l, ng/l, µg/dl,
M, mM, µM/l, U/l, mU/l, U/ml, blank.
note: The unit is simply a name tag added to the result. Due to the variety of samples that may be
measured it is impossible to enable any direct conversion between units.