Jenway 6715 User Manual

Page 104

To enter the required parameters for the sample(s) under test, select the

Settings key and the

instrument will display the following screen:

Mode settings - method name, wavelength, measurement mode, run settings, method security
(if logged in)

Calibration – allows setting of Concentration cal standard, factor, resolution and units of
measurement

Measurement display – allows auto scaling, axis setting and colour selection

Accessory options – varies with type of accessory module fitted

Allows selection of internal or external printer, graph details, batch ID and the Auto Log
options

Press to accept settings entered

Setting Method iD

To allocate a Method name select the

Method key and enter the preferred name using the

alphanumeric keypad. The

Clear key will clear all information entered from the screen. The Del key

allows individual letters or digits to be removed. The

Cancel key will return you to the previous menu

and the method name will remain as Default Method. The

Enter key accepts the new method ID and

returns you to the previous menu.

note: The new Method ID can only be used to identify the method on a printout to the internal or
external printer module. The generic user has no additional facility to store or recall these results or
the method settings.

This manual is related to the following products:

6705 6700