Jenway 6715 - Manual (Page 44)

26
Deleting Methods
To delete methods highlight the required method in the Browse screen as described in Recalling Methods and
then touch the
Erase icon.
A warning message will be displayed to ensure this action is required. On confirmation the selected file will be
deleted.
If the current user does not have the required privileges to delete the selected method then an information
message will be displayed advising that the method cannot be deleted.
Privileges required for deleting designated methods:
Public Methods – only the Supervisor and Originator can delete these.
read-only Methods – only the Supervisor and Originator can delete these.
Personal Methods – Only the Originator can delete these methods. (The Supervisor can delete these by re-
setting the Originator’s PIN code and then logging in as the Originator).
Saving results
After completion of a measurement the result can be saved by simply pressing the Save key on the display
surround. The result is saved under the method that created it, with the entered Batch ID and an incremental
number along with the time and date of the measurement. Results can also be saved as part of the
Auto Log
function by selecting Memory under the Auto Log option, which will vary depending on the type of sampling
accessory fitted.
Printing results
After completion of a measurement the result can be printed, by simply pressing the Print key on the display
surround. The result will be printed to either the internal or external printer, as selected by the user in the Printer
Settings option.
The first result of any new batch is preceded by a print header, which gives details of the method settings and
Batch ID. Results can also be printed as part of the
Auto Log function, which will vary depending on the type of
sampling accessory fitted.
recalling results
Stored results are always directly linked to the method that created them. To access results first recall the method
as described in
Recalling Methods. With the method highlighted touch the Search Results icon. This will open
a screen detailing all results available to the current user. Touch the required result or batch (depending on the
mode) and then the
Open Specific Result icon. This will display the results on the screen. The Tools option
can then be used to work on these results (depending on mode). It is also possible to print the result by simply
pressing the
Print key on the display surround. Options to print to the Internal or External printer or to the CSV
file will be displayed. Printing to the CSV (Comma Separated Values) file will save the data in CSV format on the
external data card. (If a card is not fitted the instrument will display a prompt). This is in text format and can be
viewed and printed in Excel
® .
In Kinetics mode an additional option is available (Analogue Mode). This allows results to be output via the rear
panel analogue sockets to a chart recorder or similar device.
Sharing results
Results attached to Personal Methods cannot be accessed by any other user.
Results attached to Read-Only and Public Methods can be accessed by all users, based on their current
Method View Settings.