Jenway 6715 User Manual

Page 53

To enter the appropriate parameters for the sample(s) to be tested select the

Settings key and the

instrument will display the following screen:

Mode settings - method ID, wavelength, method security (if logged in)

Accessory options - varies with type of accessory module fitted

Allows selection of internal or external printers

Allows set-up of batch ID and enables or disables or disables the Auto Save feature

Press to accept settings entered

Setting Method iD

To allocate a Method name select the

Method key and enter the preferred name using the

alphanumeric keypad. The

Clear key will clear all information entered from the screen. The Del key

allows individual letters or digits to be removed. The

Cancel key will return you to the previous menu

and the method name will remain as Default Method. The

Enter key accepts the new method ID and

returns you to the previous menu.

note: The new Method ID can only be used to identify the method on a printout to the internal or
external printer module. The generic user has no additional facility to store or recall results or methods.

This manual is related to the following products:

6705 6700