beautypg.com

GW Instek GPT-9900 series User Manual User Manual

Page 165

background image

APPENDIX

165

I

For GB tests. Current too low. Indicates that
the SOURCE L or SOURCE H test lead is open
or poorly connected. Test the test lead
connection with the DUT to confirm.

I>SET

For GB tests. Current is too high.

R=0

For GB tests. Resistance = 0. This error
indicates that there is an error with the
measured resistance (0Ω). Perform the zeroing
function again.

GBV OVER

GBV > 5.4V

See also other documents in the category GW Instek Equipment: