GW Instek GPT-9900 series User Manual - Manual (Page 147)

REMOTE CONTROL
147
Sweep Commands
SWEEP:DATA:STATus ........................................................................... 147
SWEEP:DATA:SHOW ..................................................................... 148
SWEEP:GRAPh:SHOW ........................................................................... 149
SWEEP :GRAPh:LINE ............................................................................. 149
SWEEP:STARt:TIME ............................................................................... 150
SWEEP:DATA:STATus
Query
Description Returns the sweep mode, the voltage and current
settings and the number data points that are used
in the last sweep. There can be a maximum of 190
data points, depending on the testing time.
The data is returned as a string in the following
format:
SWEEP MODE,VSET,ISET,Get Data[#data points].
Query Syntax SWEEP:DATA:STATus?
Return parameter SWEEP MODE, VSET+unit, ISET+units,
Get Data=number of data points
Example SWEEP:DATA:STATus?
>ACW,V=0.108kV,HI=10.96 mA ,Get Data=011