GW Instek GPT-9900 series User Manual - Manual (Page 131)

REMOTE CONTROL
131
is over 30mA (GPT-98XX) or over 80mA (GPT-
99XX/99XXA). This applies to the ACW function
only.
Syntax
Query Syntax MANU:RTIMe
MANU:RTIMe?
Parameter/
Return parameter 0.1~999.9 seconds
Example MANU:RTIM 0.5
Sets the ramp time to half a second.
MANU:EDIT:MODE
Set
Query
Description Sets or returns the mode (ACW, DCW, IR, GB) of
the selected manual test.
Syntax
Query Syntax MANU:EDIT:MODE {ACW|DCW|IR|GB}
MANU:EDIT:MODE?
Parameter/
Return parameter ACW AC Withstand mode
DCW DC Withstand mode
IR Insulation Resistance mode
GB Ground Bond mode
Example MANU:EDIT:MODE ACW
Sets the mode to ACW.
MANU:ACW:VOLTage
Set
Query
Description Sets or returns the ACW voltage in kV. The test
must first be in ACW mode before this command
can be used.
Syntax
Query Syntax MANU:ACW:VOLTage
MANU:ACW:VOLTage?
Parameter/
Return parameter 0.100 ~ 5.000 (kV)
Example MANU:ACW:VOLT 1
Sets the ACW voltage to 1 kV.