GW Instek GPT-9900 series User Manual - Manual (Page 137)

REMOTE CONTROL
137
an error as all digits are outside the range of HI
SET. LO SET value2 will not produce an error, but
will return 0.05, not 0.053.
Syntax
Query Syntax MANU:DCW:CLOSet
MANU:DCW:CLOSet?
Parameter/
Return parameter 0.000 ~ 010.9 (GPT-98XX)
0.000 ~ 020.9 (GPT-99XX/99XXA)
Example MANU:DCW:CLOS 2.00
Sets the DCW LO SET current to 2mA.
MANU:DCW:TTIMe
Set
Query
Description Sets or returns the DCW test time in seconds. The
test must first be in DCW mode before this
command can be used.
In special MANU mode, the TIMER can be turned
off.
Syntax
Query Syntax MANU:DCW:TTIMe {|OFF}
MANU:DCW:TTIMe?
Parameter
OFF 0.5 ~ 999.9 seconds
TIMER OFF (special MANU mode).
Return parameter
TIME OFF
0.5 ~ 999.9 seconds
TIMER is OFF (special MANU mode).