Hired-Hand Unitized Mega Cool: Square Bottom - Manual (Page 39)

Part No. 4801-5396 Rev 5-08 Unitized System – Square Reservoir Page 39 of 63
1"
(2.54 cm)
2 1/2"
(6.35 cm)
Drive pipe
Drill Holes in Drive Pipe for Drive Insert
1.
Measure 1" (2.54 cm) from one end of drive pipe. Mark pipe. Measure 2 1/2" (6.35 cm) from end of pipe in line with first
mark. Mark pipe.
2.
Drill a 3/8" (0.95 cm) hole in pipe at each mark.