Hired-Hand Unitized Mega Cool: Square Bottom - Manual (Page 23)

Part No. 4801-5396 Rev 5-08 Unitized System – Square Reservoir Page 23 of 63
Align the top holes of the left
track with the second holes
from the top of the back plate
and insert sheet metal
screws.
Left Track
1. At the left end of the system, install the left track. Align the left-hand edge of the track unit with the left-
hand edge of the back plate.
2. Match the second row of holes (from top of back plate) with the topmost holes of left track as shown in
diagram above.
3. Insert 1/4-20 x 1/2" Hex Bolt through the second hole from the top left of the track and fasten with a
1/4-20 Hex Nut.
4. Install #14 x 1” Hex Tek screw to hold left track in position. Tighten screw securely.
5. Fasten bottom of left track to bottom support bracket with 1/4-20 x 1/2" Hex Bolt and 1/4-20 Hex Nut.
Left Track