beautypg.com

Admin domain considerations, Port admin tab components – Brocade Web Tools Administrators Guide (Supporting Fabric OS v7.3.0) User Manual

Page 96

background image

NOTE
You can drag the column divider to resize a column, or drag columns to re-arrange them in a custom
order. You can also right-click a column heading to resize one or all columns, or sort the information in
ascending or descending order.

Admin Domain considerations

In fabrics with user-defined Admin Domains, the Port Admin tab is filtered to show only ports that are
direct or indirect members of the currently selected Admin Domain:

• Direct members are ports that were directly added to the Admin Domain as members.
• Indirect members are:

Non-owned ports on a member switch

Non-owned ports to which member devices are attached

• All active ports, as well as any inactive EX_Ports are shown.

Port Admin tab components

The Port Admin tab has the following four tabs in the top left corner:

FC Ports tab displays all of the FC ports on the switch (physical FC ports and logical ports).
VE/VEx Ports tab displays all of the VE_Ports and VEx_Ports on the switch. If the switch does not

have VE_Ports and VEx_Ports, the VE/VEx Ports tab does not display.

ICL Ports tab displays all of the ICL ports on the switch. If the switch does not have ICL Ports, the

tab does not display.

GigE Ports tab displays all of the gigabit Ethernet ports. If the switch does not have gigabit

Ethernet ports, the GigE Ports tab does not display.

The GigE Ports tab has the following subtabs:

General--General information about the gigabit Ethernet ports.

SFP--Displays information about SFP ports.

Port Statistics--Displays statistics about the ports.

IP Interfaces--Lets you view interfaces

IP Routes--Lets you view routes

Inband IP Interfaces--Lets you configure interfaces

Inband IP Routes--Lets you configure routes

FCIP Tunnels --Lets you view FCIP tunnels. This tab has two buttons: Go to FCIP port
and Show Security Policies.

On selecting an FCIP tunnel, the following circuit details with the circuit properties are displayed:

• Circuit Number
• Tunnel ID
• Administrator Status
• Operational Status
• GigEPort
• Source IP
• Destination IP
• Gateway
• VLAN ID
• MTU Size

Admin Domain considerations

96

Web Tools Administrator's Guide

53-1003169-01